The specification design is from the date of manufacture; any subsequent changes may have been made. See the attached file for the full specification. The tank was previously ADR approved. Sludge volume: approx. 14,000 dm3. Water volume: approx. 1,000 dm3. Design pressure / vacuum: 4 bar, 100% vacuum. Working pressure: 1.0 + 2.0 bar. Design temperature < 50 °C. Sludge volume: approx. 14,000 dm3. Water volume: approx. 1,000 dm3. Design pressure / vacuum: 4 bar, 100% vacuum. Working pressure: 1.0 + 2.0 bar. Design temperature < 50 °C. TANK: The tank is made of stainless pressure vessel steel, SS 2333 material certificate included. Rear end: Hydraulically opened by two hydraulic cylinders, maximum opening angle 90°. Hydraulic locking with 4 locking wedges. Manhole: 1 manhole with a diameter of 450 mm, mounted in front of the wash plate. Overfill protection: Stainless steel float sealed with a rubber seal to reduce the risk of excessive suction and damage to the vacuum pump. Plastic plate: 1 unit, welded, covering at least 70% of the area. Rollover protection: Longitudinal edge at the top of the tank. Water chamber: Volume 1,000 dm3 in the front part of the tank. The chamber is non-pressurized. Manhole, diameter 450 mm. Stainless steel. 3-inch bottom outlet on the right side, including valve and hose connection. PIPING SYSTEM: Bottom outlet: 4-inch JF ball valve, mounted at the rear with a 4-inch hose connection, module 42, and blank cap. Upper suction / drum connection: 4-inch JF ball valve, mounted on the right side at the rear, with a 4-inch hose connection, module 42, and blank cap. Upper air: 4-inch rotary valve with stainless steel damper and nitrile seal. WASHING SYSTEM: High-pressure pump: Manufacturer: Prattissoli. Model: KL 36. Max. flow: 122 l/min at 1,000 rpm. Max. pressure: 120 bar. Power requirement: 30 kW. The high-pressure pump is hydraulically driven via a directly mounted hydraulic motor. Hose reel: Hydraulically driven hose reel with 60 m of ½ inch channel flushing hose, mounted in the pump cabinet. Washing accessories: 2 standard flushing nozzles and 1 flushing gun for ½ inch hose. Hose reel: Folding, hydraulically driven suction hose reel with swivel connection, length approx. 50 m of 3-inch suction hose, mounted at the rear. Vacuum pump: Jurop PR200, driven by a hydraulic motor. Manufacturer: Jurop. Model: PR200. Capacity: 20 m3/min. Free air displacement 18 m3/min at 60% vacuum. Max. vacuum: 94%. Max. pressure: 1.0 bar, 2.0 bar when discharging into a high-positioned tank. Power: 67 kW at 2.0 bar discharge pressure. Radio control: Radio control with eight selectable functions, manufactured by DATEC, complete with charger and belt holder.
Length 9100 mm Width 2550 mm Height 3700 mm Operating weight (actual weight) 15420 kg Maximum cargo weight 11580 kg Total weight 27000 kg Initial total weight 27000 kg Taxable weight 27000 kg Allowable cargo weight 11580 kg Front overhang 1380 mm Rear overhang 1890 mm Cargo compartment length 5200 mm Axle - 1 Maximum distance between axles 1-2 4300 mm Guaranteed axle/chassis load 8500 kg Axle - 2 Maximum distance between axles 2-3 1320 mm Tire size 315/80R22.5

Wheel size No information. Guaranteed axle/chassis load 19000 kg Maximum trailer weight 44000 kg Maximum trailer weight 24000 kg Maximum total weight (train weight) 70000 kg Coupling distance 8100 mm

Show less

Document

46.01.186OrderspecPRslam.doc

46.01.186Tillgg1Orderspecprslam.doc

Model and brand

Brand:

SCANIA

Model:

R400LB6X2HSZ

Variant:

First registered Sweden 2009-12-22 Sold in Sweden Sold assembled and operational

Model year:

2010

Condition

Overall rating:

The item for sale is functional but may have minor defects.

Mileage:

825054 km

Notes:

Operational, but there are remarks The construction has no known defects The vehicle is still in use, so the mileage may increase Crack in the windshield Otherwise no known defects, normal wear and tear

Engine

Power (HP):

400 HP

Power (kW):

294 kW

Number of cylinders:

6

Fuel type:

Diesel

Notes:

Certificates

EU inspection date:

September 29, 2025

EU inspection valid until:

September 3, 2026

EU inspection notes:

Odometer reading at the time of inspection 812691 km Tachograph checked 2026-04-15 Valid until 2028-04-14

Service

Notes:

Service performed on-site. Time for service.

Gearbox

Gearbox type:

Opticruise

Notes:

Without clutch pedal

Drive system

Drive type:

Rear-wheel drive

Wheel configuration

Number of axles:

3

Notes:

6x2 Axle 1: Tire size 385/65R22.5 Tread approx; 16+15 mm Axle 2: Tire size 315/80R22.5 Tread approx; 19+19+19+19 mm Axle 3: Tire size 315/80R22.5 Tread approx; 9+9+9+9 mm

Not used in Lithuania.
More information by phone.
Price plus VAT.